Comments
-
@DIBK My NSv270 SonicOSX 7.0.1-1219 also can not accept the change made via the diag page. Same behavior like your SW-Diag.gif shown. Can anyone confirm this is a known issue?
-
@shiprasahu93 These firewalls are not added to CSC. Yes, the Zero Touch Settings was enabled by default in the diag page. So in order to avoid admin(cloud) login by cloudtt.global.sonicwall.com We need to disable every firewalls manually in the diag page? Regards, Tom
-
My customer just report similar issue. SMA 410 firmware 9.0.0.6-21sv The setting page completely blank Other pages OK. Without this setting page. No way to upgrade firmware. Have restarted SMA410 appliance many times. Have tried browsers : Chrome,Firefox, MS Edge... Nothing help.
-
Obviously, this issue is on any os7x security policy with DESTINATION is any interface IP on os6.x if any Interface MANAGEMENT option "HTTPS" ,"PING" and "SSH" was enabled The allow rules will be created automatically. Then we can change the SOURCE "any" to other address object to allow only particular IP addresses. Begin…
-
I have done a test on NSv270 SonicOSX 7.0.0-1128 ZONE WAN to ZONE WAN security policy was created: SOURCE any DESTINATION X1 IP (or "All X1 Management IP" or "WAN Interface IP" Action "Deny" Interface X1 MANAGEMENT option "HTTPS" ,"PING" and "SSH" was enabled I thought the security policy can limit access to firewall…
-
I will miss these Dashboard-Threat-Reports If they were gone from SonicOS7😕
-
Global VPN Client (64-bit)4.10.5.1021 Also can be GAV detected as virus! Gateway Anti-Virus Alert: JSAgent.U_383 (Trojan) blocked.
-
I just visit wrong link https://ip-address/sonicui/7/m/mgmt/system/settings/diag Your link goes to Internal Settings correctly. https://ip-address/sonicui/7/m/mgmt/settings/diag Thanks Tom
-
What I would like to know is the "INTERNAL SETTINGS" Before SonicOS 6.x it was in https://FW-IP/diag.html Now did the SonicOS7 have same "INTERNAL SETTINGS" It is not a normal diag page. We need to set "Encryption Settings Enable TLS compatible mode" For my legacy web service application Thanks Tom
-
Hello Mallik & Shipra, Hope Sonicwall SD-WAN support FEC soon!😊 Thanks Tom
-
Unfortunately I don't know how to find a sales representative to file a RFE. So I posted this idea here, could you help on this? or anyone here can help to file a RFE?
-
The syslog Analytics is subscription based with options like 1 year, 2 years and 3 years. It is also usage driven ! So if I want my TZ500 to run syslog Analytics I need this SKU: 02-SSC-3943 SONICWALL ANALYTICS SOFTWARE FOR TZ500 SERIES 1Year and also need this SKU ?? 02-SSC-1503 SONICWALL ANALYTICS ON-PREM 500GB STORAGE…
-
The current FAQ is for On-premise Analytics 2.0 that only support flow-based and is usage-based. My question is about On-premise Analytics 2.5 that can support syslog-base,does it also usage-based? But from the SKU : 02-SSC-3943 SONICWALL ANALYTICS SOFTWARE FOR TZ500 SERIES 1Year It appears that it is Subscription based!…
-
Thanks @shiprasahu93 & @KaranM for the answer.🙂